Industrial Boiler Pipeline Cleaning Machine Tube Duct Cleaner 220V with 26ft Flexible Shaft for 12-36mm/0.47-1.42in Pipe

Product Overview <br>The industrial boiler pipeline cleaning machine is a special device for cleaning away the dirt inside pipe bundles of condensers of central air conditioners. Silt, scale, rust residues and other impurities on the pipe walls are cleaned away through the brush rotating at high speed and the rinsing water, therefore the heat exchange efficiency is guaranteed, and the heat exchange efficiency reduction and system pressure rise caused by dirt accumulation are avoided. <br> <br>Product Parameters <br>Total Power: 1500W <br>Power Voltage: 220V/50HZ Single-phase electricity(A 110V transformer is given as a present. If your power supply is 110V, you can connect the machine to the transformer and then connect the transformer to your 110V power supply.) <br>Rotating Speed: 0～1400r/min <br>Size of Main Unit: 67*23*29cm (26.4*9.1*11.4 inches) <br>Size of Control Cabinet: 38*19.5*23.5cm (15*7.7*9.3 inches) <br>Flexible Shaft: 8M (26.3ft) <br>Applicable Pipe Diameter: 12-36mm <br>Cleaning Tools: Nylon brush: 17.5mm*6 pcs <br>Nylon brush: 34mm*4 pcs <br>Alloy drill bit: 12mm*1 piece <br> <br>Attention <br>1. The flexible shaft should be stretched completely before powering on the machine, otherwise the mechanical core inside the shaft core will be twisted off, and the customers need to purchase accessories at their own expenses for replacing the damaged accessories. <br>2. When the machine is not used for a long time, please pull out the flexible shaft, and apply oil to the flexible shaft so as to maintain it and prevent the shaft core from rusting. <br>3. When the machine is powered on and works, do not touch the transmission device with hands to avoid injuries. <br> <br>Item Number (022837): <br>1 x Industrial Boiler Pipeline Cleaning Machine 220V

• ‌Powered by a robust 1500W motor, this industrial tube cleaner effectively removes tough silt, scale, and rust from condenser and heat exchanger tubes (12-36mm/0.47-1.42in).
• 220V condenser tube cleaner, equipped with a 110V-220V transformer, both 110 and 220V can be used.
• It applies split design, so that the cleaning machine can enter manholes to conduct cleaning operation, and the universality can be higher.
• The wet/dry separation design ensures water flows only through the shaft, not the main unit, effectively flushing out debris while protecting the motor from water damage.
• Equipped with a long 8-meter (26.3 ft) flexible shaft that effortlessly pass through straight pipes, tight elbows, U-shaped and S-shaped pipes.